SE-8 Remote ID Module

Remote ID Broadcast Module for the BFD Systems SE-8.

This module adds Remote ID Broadcast compliance to any BFD Systems SE-8 aircraft. The unit has a built-in GPS. It is powered by the aircraft. The unit is conformal to the the inner-arm and is designed to be compatible with all SE-8 aircraft and travel cases (with minor modifications).

Ready for Action

SE-8 Remote ID Modules are now available. Please visit the online store or contact us today!

  • Zero-Effort Compliance

    • Power is provided by the aircraft
    • The unit has a built-in GPS for position information
    • The only additional item is to check the status light (or a Remote ID app) before takeoff to ensure the unit is broadcasting
  • Conformal Design

    • Conformal design minimizes impact to existing integrations
    • Fits into SE-8 travel cases (with minor modification to the foam)
  • Hassle-Free Upgrade

    • The module can be installed by field technicians on many aircraft

    *Note: Some aircraft do not have a 5V rail connection that is accessible. In these cases the drone hub must be sent in for installation by our trained staff.

Remote ID Compliance

This module is broadcast (or direct) Remote ID transponder. It is compliant with the (evolving) standards in the US and EU.


Short-range radio

Bluetooth and WiFi 2.4GHz, output power (ERP): + 20 dBm (100 mW)

Default configuration is BT4 and BT5 beacons with 1Hz frequency


GPS, GLONASS, 2.5m positioning precision < 35 seconds for first fix


3 dBi WLAN/BLE antenna (Directed out the bottom of the aircraft)

0 dBi GPS antenna (Conformal to the arm bracket)


Powered by the aircraft

LED lights

Status and configuration mode lights

Configuration and Updates

Pinhole button to activate WiFi hotspot for configuration and updates

Operating temperature

-5°C to +40°C

End-users must register their aircraft and Remote ID module serial number with the FAA:

Users Guide

UAX SE-8 Remote ID Module Users Guide (Normal Operations, Programming, Firmware Updates)